Internal SAS Serial Attached SCSI Cable , SFF 8643 To SFF 8087 1m
Length = 1 Meter
Wire Size (AWG) = 30
Connector A = Internal Mini SAS HD (SFF-8643)
Connector B = Internal Mini SAS (SFF-8087)
Impedance = 100 Ohms
Data Rate = 6.00 Gb/s
Applications = Fibre Channel, Infiniband, and SAS 2.1 (Serial
Attached SCSI) compliant
Due to the popularity of Mini SAS HD products, please call to
Guide to SAS Connectors
# of Pins
External (also sometimes internal)
1 Mini SAS HD Introduction
March 2012 began a new Mini SAS HD R & D, and dual-port density
and low-key as a PCIe card support 6 and 12Gbps SAS applications.
The new products, including a connector / card structure and
direct-attach copper cables with SAS 2.1 standard and supports the
latest SAS protocol for high-speed data transmission in a storage
area network (san), data center, switching applications procedures.
Mini SAS HD interconnect is fully compatible with 2.1 and SFF SAS -
8644 industry standards.
2 Mini SAS HD Cable Introduction:
Mini SAS HD direct-attach cables, can provide 4 x (4 channels) or 8
x (8 Channel) cable plug configurations have been developed for the
easy wire routing. Wire design combines brand cable outlet 4 pairs
double TurboTwin telegraph cable connector backshells, for greater
flexibility and tighter bend radius, the wire can be 4 pair cable.
The two most shielded wire package aluminum foil and copper braid
letter maximize signal integrity and reduce EMI radiation.
In addition, each Mini SAS HD cable incorporates an
industry-compliant eepm signature, allows the host to recognize the
cable and auto-configuration system settings to optimize the
transmission of data signals. One of the key mechanical properties
Mini SAS HD connector cable plug is an enhanced pull-to-release
hooks, spring hooks at La reduces the insertion force to increase
their retention force on the plug with safety and stability. Mini
SAS HD cable must have three sizes (26, 28 and 30 AWG) and a length
from 0.5 to 7M.
3 Mini SAS HD editing features and advantages:
(1) fully integrated press-fit design of the container, provides a
step placement PCB.
(2) multi-port function added to allow or 4 x 8 x cable is mated
1-by-2 or 1-by-4 integrated connector.
(3) integrated container design can be integrated into the
radiator, allowing hot solutions long-reach, active optical
(4) passive - and active-copper cable options available, the
ability to extend the reach of copper wire and active.
(5) 4 x 8 x backshell options and more flexible cable options.
(6) Highest-density AOC design, almost double the current density
QSFP + AOCs, allows you to choose to use more ports.
(7) cable is in line with SAS-3 (12 gbp s) (system and optical-mode
capability), InfiniBand * (10 gbp s), Ethernet (10 gbp s) and other
agreements. Meet the next generation as well as many existing